NO POP™ RETARDER
Part Number: NO POP™
Military Specification: NOT A MIL-SPEC COATING
No Pop™ is a specially formulated additive. When paint is applied, particularly by spraying, the solvents that carry the resin and the pigments “flash off” – evaporate. This product is used to slow that process particularly in hot and humid weather. This allows the paint to flow evenly and prevents a condition known as “solvent pop”—the formation of small air bubbles on the surface of the paint. It also prevents a condition known as “dry spray”—solvent evaporating before the paint hits the surface of the substrate. So, No Pop™ keeps the material wet allowing it to flow, dry, and cure as it should.
NO POP™ is a specially formulated additive. When paint is applied, particularly by spraying, the solvents that carry the resin and the pigments “flash off” – evaporate. This product is used to slow that process particularly in hot and humid weather. This allows the paint to flow evenly and prevents a condition known as “solvent pop”—the formation of small air bubbles on the surface of the paint. It also prevents a condition known as “dry spray”—solvent evaporating before the paint hits the surface of the substrate. So, NO POP™ keeps the material wet allowing it to flow, dry, and cure as it should.
Shelf life is only applicable for materials stored in unopened and undamaged original factory filled containers. 1 year when stored at 50⁰-85⁰ F.
Add 8 fluid ounces of NO POP™ to 1 gallon of material or 2 fluid ounces to 1 quart of material.
In a 2 component system, always add NO POP™ to the component A.
Mix well. Admix with the Component B as required.