.svg)
NO PEEL™
Part Number: PT-900
Military Specification: NOT A MIL-SPEC COATING
No Peel™ – PT-900 is formulated to enable epoxy and polyurethane topcoats flow evenly despite certain surface defects or contaminants. This additive helps prevent “Orange Peel”—the pitting in paint caused by contaminants on the substrate’s surface or in the spray gun. No Peel™ is flow additive.
NO PEEL – PT-900 is formulated to enable epoxy and polyurethane topcoats flow evenly despite certain surface defects or contaminants. This additive helps prevent “Orange Peel”—the pitting in paint caused by contaminants on the substrate’s surface or in the spray gun. NO PEEL™ is flow additive.
Add a 4 oz. bottle to 1 gallon of component A material only. Do not add to Comp B (catalyst) material.This is approximately 4% by volume. If material still is not flowing properly, another 4 oz. bottle may be added. Do not add more than 8 total ounces of additive as it may adversely affect the quality of the cured topcoat. Mix THOROUGHLY by hand, mechanical mixer, or with a shaker
