CLOSE ✕
Get in Touch
Thank you for your interest! Please fill out the form below if you would like to work together.

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form

POLYKICK™ ACCELERATOR

CLEAR
|
ADDITIVES
|
POLYKICK™
POLYKICK™
POLYKICK™ ACCELERATOR

POLYKICK™ ACCELERATOR
Part Number: POLYKICK™
Military Specification: NOT A MIL-SPEC COATING

Polykick™ is a paint additive formulated by Products Techniques Inc. to accelerate the air dry time of two component polyurethane topcoat systems.   While this product reduces dry times it will not accelerate chemical cure rates.  A full chemical cure for two component polyurethane systems typically takes 4 to 7 days.  Polykick™ will accelerate the dry time of any two component polyurethane system not just PTI’s coatings.

PRODUCT SPECIFICATIONS
PTI PART NUMBER
POLYKICK™
PRODUCT TYPE:
ADDITIVES
COLOR:
CLEAR
BMS SPECIFICATION:
NONE
MIL-SPEC:
NONE
OTHER SPECIFICATIONS
NONE
UNIT SIZE
NONE

Extended Description

POLYKICK™ is a paint additive formulated by Products Techniques Inc. to accelerate the air dry time of two component polyurethane topcoat systems. While this product reduces dry times it will not accelerate chemical cure rates. A full chemical cure for two component polyurethane systems typically takes 4 to 7 days. POLYKICK™ will accelerate the dry time of any two component polyurethane system not just PTI’s coatings.

COATING PROPERTIES & CHARACTERISTICS

  • Flash Point: 116°F
  • Weight (lbs per gallon): 7.2 lbs
  • Color: Clear
  • Volatile Organic Compounds (VOC): 959 g/l
  • Specifications: Proprietary

SHELF LIFE

Shelf life is only applicable for materials stored in unopened and undamaged original factory filled containers.1 year when stored at 50⁰-85⁰ F.

MIXING INSTRUCTIONS

Shake PolyKick for 1 – 2 minutes for optimal results. Add PolyKick to the Polyurethane Topcoat according to the instructions below.

At 1% by weight added to admixed material:
  • Tack free: 1 hour
  • Dry hard: 1.5 hours
  • Material jelled: 2.5 hours
At 5% by weight added to admixed material:
  • Tack free: 20 minutes
  • Dry hard: 30 minutes
  • Material jelled: 45 minutes

Do not add more than 5%. Addition of more than 5% may adversely affect the quality of the cured topcoat.

Questions About Our Products?
Contact PTI

More PTI Products