CLOSE ✕
Get in Touch
Thank you for your interest! Please fill out the form below if you would like to work together.

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form

PT-605 ANTI-SEIZE COMPOUND

GRAY
|
LUBRICANT
|
PT-605
PT-605
PT-605 ANTI-SEIZE COMPOUND

PT-605 ANTI-SEIZE COMPOUND
Part Number: PT-605
Military Specification: NOT A MIL-SPEC COATING

PT-605 Anti-Seize Compound is a silicone based grease with a high pigmentation of microfine molybdenum disulfide.  It is heat stable and will not decompose or form a gum deposit.  It is effective under light or medium bearing loads on steel to bronze, metal babbitt, zinc, nylon, Teflon or hard-anodized aluminum surfaces.  PT-605 is an  EXTREME PRESSURE grease that protects from galling, seizing and fretting.  Also this product is virtually waterproof which helps to provide excellent rust and corrosion protection.  Normally it is suitable for operating temperatures of  -65° F to +1000° F.  This product is best used as a lubricant for gaskets threads, parts and gears that are exposed to excessive temperatures ranges.

PRODUCT SPECIFICATIONS
PTI PART NUMBER
PT-605
PRODUCT TYPE:
LUBRICANT
COLOR:
GRAY
BMS SPECIFICATION:
NONE
MIL-SPEC:
NONE
OTHER SPECIFICATIONS
NONE
UNIT SIZE
Pint, Quart and Gallon Containers

Extended Description

PT-605 Anti-Seize Compound is silicone based grease with a high pigmentation of microfine molybdenum disulfide. It is heat stable and will not decompose or form a gum deposit. It is effective under light or medium bearing loads on steel to bronze, metal Babbitt, zinc, nylon, Teflon or hard-anodized aluminum surfaces. PT-605 isEXTREME PRESSURE grease that protects from galling, seizing and fretting. Also this product is virtually waterproof which helps to provide excellent rust and /or corrosion protection. Normally it is suitable for operating temperatures of -65 F to +1000 F. This product is best used as a lubricant for gaskets threads, parts and gears that are exposed to excessive temperatures ranges.

COLORS

DARK GRAY

GREASE PROPERTIES & CHARACTERISTICS

  • Flash Point: 500°F
  • Boiling Point: 400°F
  • Weight Per Gallon: 13.44
  • Consistency: Thick/Viscous
  • VOC: 0 g/L (100% Solids)
  • Approved Surfaces: Threaded parts, bushings, gears, valve stems, chains, sprockets, levers, hinges, pivots, rollers, heat exchanger bolts, manifold bolts, or as a gasket release agent, etc.
  • Container Sizes: Pint, Quart and Gallon Containers

SHELF LIFE

Shelf life is only applicable for materials stored in unopened and undamaged original factory filled containers.1 year when stored at 50⁰-85⁰ F.

APPLICATION

Remove old lubricants by solvent washing with PTC-2001C, Acetone, IPA or MEK. Blow out degreaser or solvent residue with high-pressure air to prevent contaminating the Anti-Seize Grease. Blasting with 120-mesh aluminum oxide or other approved grit is desirable if previous lubricant has formed heavy gum deposits. Apply the grease with a brush, spatula or rag. No curing is required. All materials covered by this specification are ready for use immediately after application.

NOTE: Application of PTI products requires the use of all OSHA approved safety equipment, including proper ventilation. Additionally, PTI products require the recommended temperature/humidity conditions and film thickness ranges for optimal performance. The material, hangar, and aircraft skin temperatures should be no lower than 75⁰ F / 25⁰ C before, during and after application.

Questions About Our Products?
Contact PTI

More PTI Products