CLOSE ✕
Get in Touch
Thank you for your interest! Please fill out the form below if you would like to work together.

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form

All PTI PRoducts

Browse All PTI Products

INSIGNIA WHITE BUTYRATE DOPE

INSIGNIA WHITE BUTYRATE DOPE

COLOR:
WHITE
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CCP-I190
PRODUCT PAGE:
INSIGNIA WHITE BUTYRATE DOPE

ISOPROPYL ALCOHOL 99%

ISOPROPYL ALCOHOL 99%

COLOR:
MIL-SPEC:
TT-I-735A 3
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
IPA
PRODUCT PAGE:
ISOPROPYL ALCOHOL 99%

JUNEAU WHITE BUTYRATE DOPE

JUNEAU WHITE BUTYRATE DOPE

COLOR:
WHITE
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CCP-J189
PRODUCT PAGE:
JUNEAU WHITE BUTYRATE DOPE

KOTT S-6 REDUCER/THINNER

KOTT S-6 REDUCER/THINNER

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CCP-K105
PRODUCT PAGE:
KOTT S-6 REDUCER/THINNER

LACQUER ACRYLIC (FOR WEAPONS SYSTEMS)

LACQUER ACRYLIC (FOR WEAPONS SYSTEMS)

COLOR:
MIL-SPEC:
MIL-L-81352A, MIL-L-47117, MIL-L-46159A & MIL-P-21563B
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-110
PRODUCT PAGE:
LACQUER ACRYLIC (FOR WEAPONS SYSTEMS)

LACQUER CAMOUFLAGE

LACQUER CAMOUFLAGE

COLOR:
MIL-SPEC:
TT-L-20A, MIL-L-10287B, MIL-L-52043C & MIL-L-11195D
BMS SPECIFICATION:
na
PTI PART NUMBER:
PT-112
PRODUCT PAGE:
LACQUER CAMOUFLAGE

LACQUER THINNER

LACQUER THINNER

COLOR:
MIL-SPEC:
DMS 19348
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
DMS 19348
PRODUCT PAGE:
LACQUER THINNER

LACQUER, ACRYLIC NITROCELLULOSE GLOSS (FOR AIRCRAFT, S/S MIL-L-81352

LACQUER, ACRYLIC NITROCELLULOSE GLOSS (FOR AIRCRAFT, S/S MIL-L-81352

COLOR:
MIL-SPEC:
MIL-L-19537C & MIL-L-19538C
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-113
PRODUCT PAGE:
LACQUER, ACRYLIC NITROCELLULOSE GLOSS (FOR AIRCRAFT, S/S MIL-L-81352

LACQUER, BRUSHING, CLEAR & PIGMENTED FOR INTERIOR & EXTERIOR

LACQUER, BRUSHING, CLEAR & PIGMENTED FOR INTERIOR & EXTERIOR

COLOR:
MIL-SPEC:
TT-L-26C
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-126
PRODUCT PAGE:
LACQUER, BRUSHING, CLEAR & PIGMENTED FOR INTERIOR & EXTERIOR

LACQUER, CELLULOSE NITRATE (FOR AIRCRAFT USE & SMALL ARMS)

LACQUER, CELLULOSE NITRATE (FOR AIRCRAFT USE & SMALL ARMS)

COLOR:
MIL-SPEC:
TT-L-32A & MIL-L-10287B
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-111
PRODUCT PAGE:
LACQUER, CELLULOSE NITRATE (FOR AIRCRAFT USE & SMALL ARMS)

LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSOL

LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSOL

COLOR:
MIL-SPEC:
TT-L-50G TYI
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
TT-L-50TYI
PRODUCT PAGE:
LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSOL

LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSOL

LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSOL

COLOR:
MIL-SPEC:
TT-L-50G TYII
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
TT-L-50TYII
PRODUCT PAGE:
LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSOL

LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSOL

LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSOL

COLOR:
MIL-SPEC:
TT-L-50G TYIII
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
TT-L-50TYIII
PRODUCT PAGE:
LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSOL

LACQUER, PIGMENTED FOR INTERIOR SPRAYING (S/S A-A-3003)

LACQUER, PIGMENTED FOR INTERIOR SPRAYING (S/S A-A-3003)

COLOR:
MIL-SPEC:
TT-L-58D TYII CL. 1 & 2
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-158
PRODUCT PAGE:
LACQUER, PIGMENTED FOR INTERIOR SPRAYING (S/S A-A-3003)

LEAD & CHROMATE FREE EPOXY PRIMER

LEAD & CHROMATE FREE EPOXY PRIMER

COLOR:
MIL-SPEC:
MIL-P-53022B TYI
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
L-373
PRODUCT PAGE:
LEAD & CHROMATE FREE EPOXY PRIMER

LIACQUER THINNER

LIACQUER THINNER

COLOR:
MIL-SPEC:
A-A-857B
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
A-A-857
PRODUCT PAGE:
LIACQUER THINNER

LIFT-OFF BIODEGRADABLE PAINT REMOVER

LIFT-OFF BIODEGRADABLE PAINT REMOVER

COLOR:
WHITE
MIL-SPEC:
TT-R-2918 TYI
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CCP-S202
PRODUCT PAGE:
LIFT-OFF BIODEGRADABLE PAINT REMOVER

LOW VOC ENAMEL, ALKYD, GLOSS TOPCOAT (PT-381)

LOW VOC ENAMEL, ALKYD, GLOSS TOPCOAT

COLOR:
MIL-SPEC:
TT-E-489J
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-381
PRODUCT PAGE:
LOW VOC ENAMEL, ALKYD, GLOSS TOPCOAT (PT-381)

LOW VOC ENAMEL, ALKYD, GLOSS TOPCOAT (PT-389)

LOW VOC ENAMEL, ALKYD, GLOSS TOPCOAT

COLOR:
MIL-SPEC:
TT-E-489G
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-389
PRODUCT PAGE:
LOW VOC ENAMEL, ALKYD, GLOSS TOPCOAT (PT-389)

LOW VOC ENAMEL, ALKYD, LUSTERLESS (FLAT) TOPCOAT

LOW VOC ENAMEL, ALKYD, LUSTERLESS (FLAT) TOPCOAT

COLOR:
MIL-SPEC:
TT-E-527D
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-383
PRODUCT PAGE:
LOW VOC ENAMEL, ALKYD, LUSTERLESS (FLAT) TOPCOAT

LOW VOC ENAMEL, ALKYD, SEMIGLOSS TOPCOAT

LOW VOC ENAMEL, ALKYD, SEMIGLOSS TOPCOAT

COLOR:
MIL-SPEC:
TT-E-529G & A-A-2962
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-382
PRODUCT PAGE:
LOW VOC ENAMEL, ALKYD, SEMIGLOSS TOPCOAT

LOW VOC PRIMER, CHROMATE FREE

LOW VOC PRIMER, CHROMATE FREE

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-547
PRODUCT PAGE:
LOW VOC PRIMER, CHROMATE FREE

LYFT-OFF™

LYFT-OFF™
Part Number: PTS-202
Military Specification: TT-R-2918A TYI

PTS-202™ is a biodegradable peroxide based paint remover that is formulated to remove the most resilient coatings from metal and composite surfaces that conforms with military specification TT-R-2918A TYI.  This is a stable paint remover that will not corrode the metal.  PTS-202 works by breaking through the film of the paint and lifting the paint off in sheets instead of turning the paint to sludge.  This remover is easy and safe to use as well as clean up.

COLOR:
CLEAR
MIL-SPEC:
TT-R-2918A TYI
BMS SPECIFICATION:
None
PTI PART NUMBER:
PTS-202
PRODUCT PAGE:
LYFT-OFF™

MARKING STENCIL INK

MARKING STENCIL INK

COLOR:
MIL-SPEC:
A-A-208B/C TYI,II,III & IV
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
A-A-208B
PRODUCT PAGE:
MARKING STENCIL INK

MEDIUM EVAPORATING THINNER/REDUCER

MEDIUM EVAPORATING THINNER/REDUCER

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-1017
PRODUCT PAGE:
MEDIUM EVAPORATING THINNER/REDUCER

METHANOL (METHYL ALCOHOL) SOLVENT

METHANOL (METHYL ALCOHOL) SOLVENT

COLOR:
MIL-SPEC:
O-M-232L
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
METHANOL
PRODUCT PAGE:
METHANOL (METHYL ALCOHOL) SOLVENT

METHYL ETHYL KETONE SOLVENT

METHYL ETHYL KETONE SOLVENT

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
MEK
PRODUCT PAGE:
METHYL ETHYL KETONE SOLVENT

METHYLENE CHLORIDE TECHNICAL GRADE SOLVENT

METHYLENE CHLORIDE TECHNICAL GRADE SOLVENT

COLOR:
MIL-SPEC:
MIL-M-10676
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
METHYLENE CHLORIDE
PRODUCT PAGE:
METHYLENE CHLORIDE TECHNICAL GRADE SOLVENT

MINERAL SPIRITS SOLVENT/THINNER

MINERAL SPIRITS SOLVENT/THINNER

COLOR:
MIL-SPEC:
TT-P-291F TYI
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
MINERAL SPIRITS
PRODUCT PAGE:
MINERAL SPIRITS SOLVENT/THINNER

MODIFIED ACRYLIC

MODIFIED ACRYLIC

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
L-280
PRODUCT PAGE:
MODIFIED ACRYLIC

MODIFIED ACRYLIC, TWO COMPONENT

MODIFIED ACRYLIC, TWO COMPONENT

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-700
PRODUCT PAGE:
MODIFIED ACRYLIC, TWO COMPONENT

MOISTURE & FUNGUS RESISTANT VARNISH FOR ELECTIRCAL EQUIP.

MOISTURE & FUNGUS RESISTANT VARNISH FOR ELECTIRCAL EQUIP.

COLOR:
MIL-SPEC:
MIL-V-173C
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-107
PRODUCT PAGE:
MOISTURE & FUNGUS RESISTANT VARNISH FOR ELECTIRCAL EQUIP.

MOLYBDENUM DISULFIDE, TECHNICAL, LUBRICATION GRADE

MOLYBDENUM DISULFIDE, TECHNICAL, LUBRICATION GRADE

COLOR:
MIL-SPEC:
MIL-M-7866A
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-101
PRODUCT PAGE:
MOLYBDENUM DISULFIDE, TECHNICAL, LUBRICATION GRADE

NAPHTHA ALIPHATIC SOLVENT

NAPHTHA ALIPHATIC

COLOR:
MIL-SPEC:
TT-N-95B
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
VM&P NAPHTHA
PRODUCT PAGE:
NAPHTHA ALIPHATIC SOLVENT

NAPHTHA SOLVENT

NAPHTHA SOLVENT

COLOR:
MIL-SPEC:
TT-N-97D TYI GR B
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
NAPHTHA
PRODUCT PAGE:
NAPHTHA SOLVENT

NITRATE DOPE CLEAR

NITRATE DOPE CLEAR

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CCP-N184
PRODUCT PAGE:
NITRATE DOPE CLEAR

NITRATE DOPE REJUVENATOR

NITRATE DOPE REJUVENATOR

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CCP-N133
PRODUCT PAGE:
NITRATE DOPE REJUVENATOR

NITRATE DOPE THINNER

NITRATE DOPE THINNER

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CCP-N179
PRODUCT PAGE:
NITRATE DOPE THINNER

NITRATE RETARDER

NITRATE RETARDER

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CCP-A124
PRODUCT PAGE:
NITRATE RETARDER

NO PEEL™

NO PEEL™
Part Number: PT-900
Military Specification: NOT A MIL-SPEC COATING

No Peel™ – PT-900 is formulated to enable epoxy and polyurethane topcoats flow evenly despite certain surface defects or contaminants.  This additive helps prevent “Orange Peel”—the pitting in paint caused by contaminants on the substrate’s surface or in the spray gun. No Peel™ is flow additive.

COLOR:
CLEAR
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-900
PRODUCT PAGE:
NO PEEL™

NO POP™ RETARDER

NO POP™ RETARDER
Part Number: NO POP™
Military Specification: NOT A MIL-SPEC COATING

No Pop™  is a specially formulated additive. When paint is applied, particularly by spraying, the solvents that carry the resin and the pigments “flash off” – evaporate.  This product is used to slow that process particularly in hot and humid weather.  This allows the paint to flow evenly and prevents a condition known as “solvent pop”—the formation of small air bubbles on the surface of the paint.  It also prevents a condition known as “dry spray”—solvent evaporating before the paint hits the surface of the substrate.  So, No Pop™   keeps the material wet allowing it to flow, dry, and cure as it should.

COLOR:
CLEAR
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
NO POP™
PRODUCT PAGE:
NO POP™ RETARDER

NON-TAUTENING BUTYRATE DOPE

NON-TAUTENING BUTYRATE DOPE

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CCP-B186
PRODUCT PAGE:
NON-TAUTENING BUTYRATE DOPE

NON-TAUTENING NITRATE DOPE CLEAR

NON-TAUTENING NITRATE DOPE CLEAR

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CCP-N187
PRODUCT PAGE:
NON-TAUTENING NITRATE DOPE CLEAR

NORMAL BUTYL ACETATE SOLVENT

NORMAL BUTYL ACETATE SOLVENT

COLOR:
MIL-SPEC:
TT-B-838A
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
N-BUTYL ACETATE
PRODUCT PAGE:
NORMAL BUTYL ACETATE SOLVENT

NORMAL BUTYL ALCOHOL SOLVENT

NORMAL BUTYL ALCOHOL SOLVENT

COLOR:
MIL-SPEC:
TT-B-846B
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
N-BUTYL ALCOHOL
PRODUCT PAGE:
NORMAL BUTYL ALCOHOL SOLVENT

PAINT REMOVER #175 AQUA STRIP

#175 AQUA STRIP

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CCP-A143
PRODUCT PAGE:
PAINT REMOVER #175 AQUA STRIP

PAINT REMOVER BUTYRATE REJUVENATOR

BUTYRATE REJUVENATOR

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CCP-B130
PRODUCT PAGE:
PAINT REMOVER BUTYRATE REJUVENATOR

PAINT REMOVER SDT-110 FLOOR AND DIP TANK STRIPPER

SDT-110 FLOOR AND DIP TANK STRIPPER

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CCP-SDT-110
PRODUCT PAGE:
PAINT REMOVER SDT-110 FLOOR AND DIP TANK STRIPPER

PAINT REMOVER STRIPPER-B FLOOR AND DIP TANK STRIPPER

STRIPPER-B FLOOR AND DIP TANK STRIPPER

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CCP-STRIPPER-B
PRODUCT PAGE:
PAINT REMOVER STRIPPER-B FLOOR AND DIP TANK STRIPPER

PERMANENT PHENOLIC FOR ENGINE COMPONENTS

PERMANENT PHENOLIC FOR ENGINE COMPONENTS

COLOR:
MIL-SPEC:
MIL-PRF-3043C
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
L-336
PRODUCT PAGE:
PERMANENT PHENOLIC FOR ENGINE COMPONENTS

PLAIN WHITE BUTYRATE DOPE

PLAIN WHITE BUTYRATE DOPE

COLOR:
WHITE
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CCP-W192
PRODUCT PAGE:
PLAIN WHITE BUTYRATE DOPE

POLY-VINYL COPOLYMER CIRCUIT BOARD COATING

POLY-VINYL COPOLYMER CIRCUIT BOARD COATING

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-207
PRODUCT PAGE:
POLY-VINYL COPOLYMER CIRCUIT BOARD COATING

POLY. COATING, WATERBORNE POLYURETHANE FOR AIRCRAFT USE

COATING, WATERBORNE POLYURETHANE FOR AIRCRAFT USE

COLOR:
MIL-SPEC:
MIL-PRF-81352C TYIII
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PTW-170
PRODUCT PAGE:
POLY. COATING, WATERBORNE POLYURETHANE FOR AIRCRAFT USE

POLYKICK™ ACCELERATOR

POLYKICK™ ACCELERATOR
Part Number: POLYKICK™
Military Specification: NOT A MIL-SPEC COATING

Polykick™ is a paint additive formulated by Products Techniques Inc. to accelerate the air dry time of two component polyurethane topcoat systems.   While this product reduces dry times it will not accelerate chemical cure rates.  A full chemical cure for two component polyurethane systems typically takes 4 to 7 days.  Polykick™ will accelerate the dry time of any two component polyurethane system not just PTI’s coatings.

COLOR:
CLEAR
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
POLYKICK™
PRODUCT PAGE:
POLYKICK™ ACCELERATOR

POLYURETHANE ACCELERATOR

POLYURETHANE ACCELERATOR

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
POLYKICK
PRODUCT PAGE:
POLYURETHANE ACCELERATOR

POLYURETHANE ALUMINUM PASTE

ALUMINUM PASTE

COLOR:
MIL-SPEC:
A-A-341
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-723
PRODUCT PAGE:
POLYURETHANE ALUMINUM PASTE

POLYURETHANE AND ACRYLIC THINNER

POLYURETHANE AND ACRYLIC THINNER

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-1004
PRODUCT PAGE:
POLYURETHANE AND ACRYLIC THINNER

POLYURETHANE CLEAR COATING

POLYURETHANE CLEAR COATING

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-795
PRODUCT PAGE:
POLYURETHANE CLEAR COATING

POLYURETHANE COATING COMPOUND, NON-SLIP, WALK WAY & WING WALK

COATING COMPOUND, NON-SLIP, WALK WAY & WING WALK

COLOR:
MIL-SPEC:
A-A-59166 TYI & TYII
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-766
PRODUCT PAGE:
POLYURETHANE COATING COMPOUND, NON-SLIP, WALK WAY & WING WALK

POLYURETHANE FOR AIRCRAFT AND SUPPORT EQUIPMENT (PT-785)

POLYURETHANE FOR AIRCRAFT AND SUPPORT EQUIPMENT

COLOR:
MIL-SPEC:
MIL-PRF-85285D TYI & MIL-C-85285
BMS SPECIFICATION:
BMS 10-60N TYI GR D
PTI PART NUMBER:
PT-785
PRODUCT PAGE:
POLYURETHANE FOR AIRCRAFT AND SUPPORT EQUIPMENT (PT-785)

POLYURETHANE FOR AIRCRAFT AND SUPPORT EQUIPMENT (PT-799)

POLYURETHANE FOR AIRCRAFT AND SUPPORT EQUIPMENT

COLOR:
MIL-SPEC:
MIL-PRF-85285E TYI & II
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-799
PRODUCT PAGE:
POLYURETHANE FOR AIRCRAFT AND SUPPORT EQUIPMENT (PT-799)

POLYURETHANE FOR AIRCRAFT AND SUPPORT EQUIPMENT, HIGH SOLIDS (PT-787)

POLYURETHANE FOR AIRCRAFT AND SUPPORT EQUIPMENT, HIGH SOLIDS

COLOR:
MIL-SPEC:
MIL-C-85285B
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-787
PRODUCT PAGE:
POLYURETHANE FOR AIRCRAFT AND SUPPORT EQUIPMENT, HIGH SOLIDS (PT-787)

POLYURETHANE PRIMER

POLYURETHANE PRIMER

COLOR:
YELLOW/GREEN
MIL-SPEC:
MIL-C-27725B TY. II; CL. A/B
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
CC-750P
PRODUCT PAGE:
POLYURETHANE PRIMER

POLYURETHANE THINNER PT-1003

POLYURETHANE THINNER

COLOR:
MIL-SPEC:
MIL-T-81772B TY I
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-1003 TYI
PRODUCT PAGE:
POLYURETHANE THINNER PT-1003

PRIMER FOR SHIPBOARDS, VINYL-ZINC CHROMATE

PRIMER FOR SHIPBOARDS, VINYL-ZINC CHROMATE

COLOR:
MIL-SPEC:
MIL-P-15930C
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-572
PRODUCT PAGE:
PRIMER FOR SHIPBOARDS, VINYL-ZINC CHROMATE

PRIMER ZINC MOLYDBATE ALKYD TYPE

PRIMER ZINC MOLYDBATE ALKYD TYPE

COLOR:
MIL-SPEC:
TT-P-645B
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
TT-P-645
PRODUCT PAGE:
PRIMER ZINC MOLYDBATE ALKYD TYPE

PRIMER, CELLULOSE-NITRATE MODIFIED ALKYD, CORROSION-INHIBITING, FAST DRYING ( SPRAY APPLICATION OVER PRETREATMENT COATING)

PRIMER, CELLULOSE-NITRATE MODIFIED ALKYD, CORROSION-INHIBITING, FAST DRYING ( SPRAY APPLICATION OVER PRETREATMENT COATING)

COLOR:
YELLOW
MIL-SPEC:
MIL-P-7962D
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-562
PRODUCT PAGE:
PRIMER, CELLULOSE-NITRATE MODIFIED ALKYD, CORROSION-INHIBITING, FAST DRYING ( SPRAY APPLICATION OVER PRETREATMENT COATING)

PRIMER, ZINC MOLYBDATE, ALKYD TYPE

PRIMER, ZINC MOLYBDATE, ALKYD TYPE

COLOR:
MIL-SPEC:
TT-P-645B
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-545
PRODUCT PAGE:
PRIMER, ZINC MOLYBDATE, ALKYD TYPE

PRIMER, ZINC PHOSPHATE, ALKYD FOR GENERAL USE/ALL-PURPOSE

PRIMER, ZINC PHOSPHATE, ALKYD FOR GENERAL USE/ALL-PURPOSE

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-564
PRODUCT PAGE:
PRIMER, ZINC PHOSPHATE, ALKYD FOR GENERAL USE/ALL-PURPOSE

PT-101 MOLY SPRAY

PT-101 MOLY SPRAY
Part Number: PT-101
Military Specification: NOT A MIL-SPEC COATING

Moly spray is unequaled as a lubricant for machine tools, plastic molding machines, paper and textile making equipment, oven mechanisms, and sheet metal and tube bending operations.  It is highly recommended for use wherever pressures or temperatures are extreme or environmental conditions render liquid lubricants undesirable.  In field tests, Moly Spray has proven superior for widely diversified uses.  It is outstanding in numerous industrial and military applications including automobile mechanisms, sporting equipment, office machines, lathes, milling machines, planers, presses, chucks, arbors, bearings, universal joints and controls, and adjustments.  Moly Spray is also effective in broaching cold swaging, drawing, stretching, forming, and press-fit operations.  Moly Spray excels as a lubricant, anti-galling, or separating agent on steel, steel alloys, cast iron, aluminum or aluminum alloys, copper alloys, lead and zinc alloys, titanium, wood, rubber, plastics, ceramics and glass.


COLOR:
GRAY
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-101
PRODUCT PAGE:
PT-101 MOLY SPRAY

PT-110 ACRYLIC LACQUER

PT-110 ACRYLIC LACQUER
Part Number: PT-110 (PLUS COLOR #)
Military Specification: MIL-L-81352A, BELL HELICOPTER SPECIFICATION 299-947-069.

PT-110 is a general purpose high performance, single component acrylic lacquer topcoat designed for interior or exterior use on metal or composite surfaces.  PT-110 meets and exceeds MIL-L-81352A and the Bell Helicopter Specification 299-947-069.  This product is available in bulk and aerosol cans.

COLOR:
CALL FOR COLORS
MIL-SPEC:
MIL-L-81352A
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-110
PRODUCT PAGE:
PT-110 ACRYLIC LACQUER

PT-14 MICROFINE TECHLUBE

PT-14 MICROFINE TECHLUBE (W GRAPHITE), PT-17 MICROFINE TECHNLUBE
Part Number: PT-14, PT-17
Military Specification: PT-14 IS NOT A MIL SPEC COATING, PT-17 IS MIL-L 46010 TY II

These dry film lubricants are intended to be applied to equipment such as but not limited to steel, aluminum, magnesium, clutches, gears, shafts and other mechanical parts which function under extreme weathering and/or operating conditions.

PT-14 is a microfine Molybdenum Disulphide with graphite in a multi-polymer thermosetting resin binder.  PT-14 is supplied in concentrate form requiring reduction with PT-1002 solvent.  PT-14 is designed for operating temperatures from -100F too +500F.

PT-17 is a microfine Molybdenum Disulphide (no graphite) in a multi-polymer thermosetting resin binder 9.  PT-17 is supplied in concentrate form requiring reduction with PT1002 solvent.  PT-17 is designed for operating temperatures between -300F and +500F.  Meets MIL-L 46010 TY II.

COLOR:
GRAY
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-14
PRODUCT PAGE:
PT-14 MICROFINE TECHLUBE

PT-17 MICROFINE TECHLUBE (No Graphite)

PT-14 MICROFINE TECHLUBE (W GRAPHITE), PT-17 MICROFINE TECHNLUBE
Part Number: PT-14, PT-17
Military Specification: PT-14 IS NOT A MIL SPEC COATING, PT-17 IS MIL-L 46010 TY II

These dry film lubricants are intended to be applied to equipment such as but not limited to steel, aluminum, magnesium, clutches, gears, shafts and other mechanical parts which function under extreme weathering and/or operating conditions.

PT-14 is a microfine Molybdenum Disulphide with graphite in a multi-polymer thermosetting resin binder.  PT-14 is supplied in concentrate form requiring reduction with PT-1002 solvent.  PT-14 is designed for operating temperatures from -100F too +500F.

PT-17 is a microfine Molybdenum Disulphide (no graphite) in a multi-polymer thermosetting resin binder 9.  PT-17 is supplied in concentrate form requiring reduction with PT1002 solvent.  PT-17 is designed for operating temperatures between -300F and +500F.  Meets MIL-L 46010 TY II.

COLOR:
GRAY
MIL-SPEC:
MIL-L 46010 TY II
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-17
PRODUCT PAGE:
PT-17 MICROFINE TECHLUBE (No Graphite)

PT-24G MICROFINE TECHLUBE (WITH GRAPHITE)

PT-24M MICROFINE TECHLUBE, PT-24G MICROFINE TECHNLUBE (w/graphite)
Part Number: PT-24M, PT-24G
Military Specification: NOT MIL SPEC COATINGS

PT-24M is a Molydbenum Disolphide in a multi-polymer bake cure resin binder. This product contains laminar solids and soft metals.  The soft metals are employed to improve wear characteristics under certain conditions that are largely determined by electrical and thermal conductivity.  PT-24M has been proven to be the product for high temperature and high speed dry film lubrication.  This dry film lubricant is intended to be applied to equipment such as but not limited to steel, aluminum, magnesium, clutches, gears, shafts and other mechanical parts which function under extreme weathering and/or operating conditions.

PT-24G is a Graphite pigment in a multi-polymer bake cure resin binder. This product contains laminar solids and soft metals.  The soft metals are employed to improve wear characteristics under certain conditions that are largely determined by electrical and thermal conductivity.  PT-24G has been proven to be the product for high temperature and high speed dry film lubrication.  This dry film lubricant is intended to be applied to equipment such as but not limited to steel, aluminum, magnesium, clutches, gears, shafts and other mechanical parts which function under extreme weathering and/or operating conditions.

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-24G
PRODUCT PAGE:
PT-24G MICROFINE TECHLUBE (WITH GRAPHITE)

PT-24M MICROFINE TECHLUBE

PT-24M MICROFINE TECHLUBE, PT-24G MICROFINE TECHNLUBE (w/graphite)
Part Number: PT-24M, PT-24G
Military Specification: NOT MIL SPEC COATINGS

PT-24M is a Molydbenum Disolphide in a multi-polymer bake cure resin binder. This product contains laminar solids and soft metals.  The soft metals are employed to improve wear characteristics under certain conditions that are largely determined by electrical and thermal conductivity.  PT-24M has been proven to be the product for high temperature and high speed dry film lubrication.  This dry film lubricant is intended to be applied to equipment such as but not limited to steel, aluminum, magnesium, clutches, gears, shafts and other mechanical parts which function under extreme weathering and/or operating conditions.

PT-24G is a Graphite pigment in a multi-polymer bake cure resin binder. This product contains laminar solids and soft metals.  The soft metals are employed to improve wear characteristics under certain conditions that are largely determined by electrical and thermal conductivity.  PT-24G has been proven to be the product for high temperature and high speed dry film lubrication.  This dry film lubricant is intended to be applied to equipment such as but not limited to steel, aluminum, magnesium, clutches, gears, shafts and other mechanical parts which function under extreme weathering and/or operating conditions.

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-24M
PRODUCT PAGE:
PT-24M MICROFINE TECHLUBE

PT-355 ENGINE ENAMEL

PT-355 ENGINE ENAMEL
Part Number: PT-355
Military Specification: NOT A MIL-SPEC

PT-355 Engine Enamel is a heat resistant enamel packaged in bulk or aerosol cans.  It is intended for use over metal surfaces that can withstand temperatures of 500°F. Although some colors will darken at this temperature, the integrity of the coating will remain intact. The Engine Enamel can be applied over bare, scuffed, sanded, abrasive blasted, primed and previously painted surfaces and shows excellent protection.

COLOR:
CALL FOR COLORS
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-355
PRODUCT PAGE:
PT-355 ENGINE ENAMEL

PT-402 ACID ETCHING PRIMER

PT-402 ACID ETCHING PRIMER
Part Number: PT-402 (YELLOW OR GREEN)
Military Specification: DOD-P-15328D, MIL-C-8514C-PT-1045 Reducer

PT-402 Acid Etching Primer, when properly reduced with PT-1045 Reducer, meets and exceeds MIL-C-8514C. PT-402is a polyvinyl butyral zinc chromate formulation that may be used to prime all plain or plated metallic surfaces. Priming surfaces with PT-402 Acid Etching Primer prior to priming with epoxy primer MIL-PRF-23377 or by itself will ensure maximum adhesion and protection of all bake or air-dry finish coats (including lacquer finish coats). The finely ground emulsions of zinc chromate pigments, resins and phosphoric acid hardeners are virtually non-settling. Once applied, the Acid Etching Primer requires no sanding and has a pot life of 8 hours. Extreme humidity can affect the bonding of the coating.

COLOR:
YELLOW/GREEN
MIL-SPEC:
DOD-P-15328D, MIL-C-8514C-PT-1045 Reducer
BMS SPECIFICATION:
None
PTI PART NUMBER:
PT-402
PRODUCT PAGE:
PT-402 ACID ETCHING PRIMER

PT-426F LOW VOC EPOXY TOPCOAT

PT-426F LOW VOC EPOXY TOPCOAT
Part Number: PT-426F & G (COLOR#)
Military Specification: PT-426F – MIL-PRF-22750E, F & G Type I CL H GRADE B as well as BMS 10-11V Type II

PT-426F – MIL-PRF-22750E, F & G Type I CL H GRADE B as well as BMS 10-11V Type II are high performance, two component catalyst cure epoxy topcoats designed for interior and exterior use on high performance aviation/aerospace, industrial, and marine applications. PT-426G Series Epoxy meets, and exceedsThis high performance coating contains no substance of known toxicity (under normal usage conditions) and provides ultimate protection. These epoxy topcoats provide a high quality finish to metal, wood, and most other materials capable of being coated and offer excellent chemical resistance properties.

COLOR:
CALL FOR COLORS
MIL-SPEC:
PT-426F – MIL-PRF-22750E, F & G Type I CL H GRADE B
BMS SPECIFICATION:
BMS 10-11V Type II
PTI PART NUMBER:
PT-426F & G
PRODUCT PAGE:
PT-426F LOW VOC EPOXY TOPCOAT

PT-500GIC EPOXY PRIMER

PT-500GIC EPOXY PRIMER
Part Number: PT-500KIC2 TYI CL. C2
Military Specification: MIL-PRF-23377 Rev. F, G, H, J & K TY. I, CL. 2. -- NAVY QPD (QUALIFIED PRODUCTS DATABASE)

PT-500K Epoxy Primer is a low VOC epoxy polyamide solvent primer on the Navy QPD as PT-500 GIC. .PT-500KIC2 TY 1 CL. 2 is highly recommended for use on aluminum and other metallic surfaces to insure maximum protection against corrosion.  PT-500K Epoxy Primer also insures maximum adhesion of PTI TUF/FILM coating, polyurethane, epoxy, enamel, lacquer or any finish coats. This Primer is intended to be used for aircraft, marine, original equipment manufacturing and all other industrial applications.

COLOR:
YELLOW/GREEN
MIL-SPEC:
MIL-PRF-23377 Rev. F, G, H, J & K TY. I, CL. 2.
BMS SPECIFICATION:
BMS 10-11Y TY. I GRADE E
PTI PART NUMBER:
PT-500KIC2 TYI CL. C2
PRODUCT PAGE:
PT-500GIC EPOXY PRIMER

PT-522 ZINC CHROMATE PRIMER

PT-522 ZINC CHROMATE PRIMER
Part Number: PT-522 Yellow or Green Chromate/Non-Chromate
Military Specification: TT-P-1757 TYI CLASS C & N

PT-522 Zinc Chromate Primer — TT-P-1757 TYI CLASS C & N is a general purpose, rust inhibitive, alkyd primer. It is intended for use over metals that are bare, scuffed, sanded, lightly rusted, abrasive blast and previously painted surfaces while showing excellent anti-corrosion properties. The primer chemically etches into the surface to provide exceptional adhesion and durability. Also, moisture in the air causes the zinc chromate to react with the metal surface, and it forms a passive film that prevents corrosion. Although this primer is intended for metals, it may be applied to wood, composite and concrete surfaces.  PT-522 is not resistant to all solvents, i.e. MEK and Acetone.

COLOR:
YELLOW/GREEN
MIL-SPEC:
TT-P-1757 TYI CLASS C & N
BMS SPECIFICATION:
None
PTI PART NUMBER:
PT-522
PRODUCT PAGE:
PT-522 ZINC CHROMATE PRIMER

PT-573 - FILLER/SANDING PRIMER

PT-573 - FILLER/SANDING PRIMER
Part Number: PT-573
Military Specification: Not a MIL-SPEC Coating

PT-573 Filler/ Sanding Epoxy Primer is a two component epoxy based primer. PT-573 is capable of filling small holes and imperfections before top coating. PT-573 provides a smooth, sandable base coat that improves the adhesion and appearance of the top coat. Because of PT-573’s unique formula, this primer also provides excellent rust and corrosion protection. This primer is compatible with PTI’s topcoats.

COLOR:
GRAY
MIL-SPEC:
None
BMS SPECIFICATION:
None
PTI PART NUMBER:
PT-573
PRODUCT PAGE:
PT-573 - FILLER/SANDING PRIMER

PT-605 ANTI-SEIZE COMPOUND

PT-605 ANTI-SEIZE COMPOUND
Part Number: PT-605
Military Specification: NOT A MIL-SPEC COATING

PT-605 Anti-Seize Compound is a silicone based grease with a high pigmentation of microfine molybdenum disulfide.  It is heat stable and will not decompose or form a gum deposit.  It is effective under light or medium bearing loads on steel to bronze, metal babbitt, zinc, nylon, Teflon or hard-anodized aluminum surfaces.  PT-605 is an  EXTREME PRESSURE grease that protects from galling, seizing and fretting.  Also this product is virtually waterproof which helps to provide excellent rust and corrosion protection.  Normally it is suitable for operating temperatures of  -65° F to +1000° F.  This product is best used as a lubricant for gaskets threads, parts and gears that are exposed to excessive temperatures ranges.

COLOR:
GRAY
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-605
PRODUCT PAGE:
PT-605 ANTI-SEIZE COMPOUND

PT-650 TOOTH MARKING GREASE

PT-650 TOOTH MARKING GREASE
Part Number: PT-650
Military Specification: NOT A MIL-SPEC COATING

PT-650 Tooth Marking Grease is an ester based oil with high pigmentation loading.  Although PT-650 has the consistency of a thick paste, it may be thinned or thickened to meet your requirements.  PT-650 is a lubricant for marking teeth on gears to enable one to determine when maintenance is necessary.


COLOR:
CALL FOR COLORS
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-650
PRODUCT PAGE:
PT-650 TOOTH MARKING GREASE

PT-799 - POLYURETHANE

PT-799 - POLYURETHANE
Part Number: PT-799 (PLUS COLOR#)
Military Specification: MIL-PRF-85285D/E Type I, II & IV Class H. This coating is on the NAVY QPD (Qualified Products Database) for TY I, II & IV (gloss only)

PT-799 Polyurethane is a high performance, two-component, polyurethane topcoat designed for exterior use on high performance, general aviation, business jet, and commercial aircraft.  This coating is also used widely for industrial, oil and gas as well as by original equipment manufacturers. These high performance coatings have excellent resistance to hydraulic jet fluid, fuel, crude oil, impact, salt and ultraviolet rays.  PT-799 Polyurethane is extremely durable with excellent color and gloss retention.

PT-799 Conductive Black is also available.  It is formulated as an electrically conductive paint which can be used for coating and sealing non-metallic surfaces by brushing or spraying. The Conductive Coating is intended for use where an electrostatic discharge path is required for electrical continuity on non-metallic substrates.

COLOR:
CLEAR
MIL-SPEC:
MIL-PRF-85285D/E Type I, II & IV Class H
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-799
PRODUCT PAGE:
PT-799 - POLYURETHANE

PTW-582 WATER REDUCIBLE EPOXY PRIMER

PTW-582 WATER REDUCIBLE EPOXY PRIMER
Part Number: PTW-582
Military Specification: MIL-PRF -85582D. BMS 10-11Y TY I, CL A, GR E. -- NAVY QPD (QUALIFIED PRODUCTS DATABASE)

PTW-582 Water Reducible Epoxy Primer is chemical and solvent resistant. It is especially recommended to inhibit corrosion of aluminum and other plated or unplated metallic surfaces. PTI’s Water Reducible Epoxy Primer is recommended for all PTI topcoats to provide maximum adhesion and corrosion protection.

COLOR:
GREEN
MIL-SPEC:
MIL-PRF -85582D
BMS SPECIFICATION:
BMS 10-11Y TY I, CL A, GR E.
PTI PART NUMBER:
PTW-582
PRODUCT PAGE:
PTW-582 WATER REDUCIBLE EPOXY PRIMER

Primer Coatings: Epoxy, Waterborne

Primer Coatings: Epoxy, Waterborne

COLOR:
MIL-SPEC:
MIL-PRF-85582E TYI & II
BMS SPECIFICATION:
BMS 10-11V TYI CL A GR B
PTI PART NUMBER:
PTW-582
PRODUCT PAGE:
Primer Coatings: Epoxy, Waterborne

RED OXIDE ALKYD PRIMER

RED OXIDE ALKYD PRIMER

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-532
PRODUCT PAGE:
RED OXIDE ALKYD PRIMER

RED OXIDE FAST DRY ALKYD PRIMER LEAD & CHROMATE FREE, VOC COMPLIANT

RED OXIDE FAST DRY ALKYD PRIMER LEAD & CHROMATE FREE, VOC COMPLIANT

COLOR:
MIL-SPEC:
MIL-P-11414E
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
MIL-P-11414
PRODUCT PAGE:
RED OXIDE FAST DRY ALKYD PRIMER LEAD & CHROMATE FREE, VOC COMPLIANT

RED OXIDE PRIMER

RED OXIDE PRIMER

COLOR:
MIL-SPEC:
TT-P-664D
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
TT-P-664
PRODUCT PAGE:
RED OXIDE PRIMER

RETARDER ADDITIVE FOR PAINTS AND PRIMERS

RETARDER ADDITIVE FOR PAINTS AND PRIMERS

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
RETARDER
PRODUCT PAGE:
RETARDER ADDITIVE FOR PAINTS AND PRIMERS

Remover, Paint, No Hazardous Air Pollutants (HAPS)

Remover, Paint, No Hazardous Air Pollutants (HAPS)

COLOR:
WHITE
MIL-SPEC:
TT-R-2918 & MIL-PRF-83936
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PTS-202
PRODUCT PAGE:
Remover, Paint, No Hazardous Air Pollutants (HAPS)

SEALER FOR EPOXY ANTI-GRAFFITI COATING

SEALER FOR EPOXY ANTI-GRAFFITI COATING

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-450SEALER
PRODUCT PAGE:
SEALER FOR EPOXY ANTI-GRAFFITI COATING

SILICONE 2000°f HIGH TEMP. THERMAL LAG COATING

2000°f HIGH TEMP. THERMAL LAG COATING

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-209C
PRODUCT PAGE:
SILICONE 2000°f HIGH TEMP. THERMAL LAG COATING

SILICONE ALKYD

SILICONE ALKYD

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
D-116
PRODUCT PAGE:
SILICONE ALKYD

SILICONE HIGH TEMPERATURE THERMAL LAG COATING

HIGH TEMPERATURE THERMAL LAG COATING

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-209B
PRODUCT PAGE:
SILICONE HIGH TEMPERATURE THERMAL LAG COATING

SILICONE RUBBER COATING

SILICONE RUBBER COATING

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-878
PRODUCT PAGE:
SILICONE RUBBER COATING

SLOW EVAPORATING THINNER/REDUCER

SLOW EVAPORATING THINNER/REDUCER

COLOR:
MIL-SPEC:
NONE
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
PT-1018
PRODUCT PAGE:
SLOW EVAPORATING THINNER/REDUCER

SOLVENT ETHYL ALCHOL; DENATURED ALCOHOL; ETHANOL 200

ETHYL ALCHOL; DENATURED ALCOHOL; ETHANOL 200

COLOR:
MIL-SPEC:
A-A-59342
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
ETHANOL
PRODUCT PAGE:
SOLVENT ETHYL ALCHOL; DENATURED ALCOHOL; ETHANOL 200

SOLVENT THINNED ENAMEL

SOLVENT THINNED ENAMEL

COLOR:
MIL-SPEC:
A-A-2787 TYI
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
A-A-2787
PRODUCT PAGE:
SOLVENT THINNED ENAMEL

SOLVENT XYLENE

XYLENE

COLOR:
MIL-SPEC:
TT-X-916B & A-A-59760
BMS SPECIFICATION:
NONE
PTI PART NUMBER:
XYLENE
PRODUCT PAGE:
SOLVENT XYLENE
ALL PTI PRODUCT CATEGORIES
|
ALL PTI PRODUCTS
|
DISTRIBUTORS
Questions About Our Products?
Contact PTI